Which environment is not suitable for the installation of industrial large fans

Industrial large fans are widely used, reduce energy consumption and are widely welcomed by factory customers. However, there are some environments that are not suitable for the installation of industrial large fans, mainly the following, today to share with you our experience:
1, dusty environment, because there is too much dust, a wide range of fans will cause dust to drift around, so it is not suitable for installation.
2, argon arc welding, gas welding and other welding workshops, because this welding process is very demanding, if the airflow is very large, it is not possible.
3, the ambient temperature is very high, higher than 42 degrees, the installation of industrial fan will not receive a good effect, because after all, the industrial fan is through the wind cycle to achieve cooling effect, if the ambient temperature is too high, relying on the wind cycle is unable to achieve satisfactory results.
With the continuous development of aerospace technology, many new materials have been widely used in the field of aerodynamics, such as carbon fiber, graphite composite materials, etc., of which carbon fiber is the most widely used, but also greatly enhance the development of the field.
As the application of industrial large ceiling fans becomes more and more extensive and the requirements become higher and higher, the next step will be the carbon fiber will gradually be applied in the field of industrial large ceiling fans. If the above situation, it should not be suitable for the installation of industrial fans, need to find another way to do cooling.