Source Of Noise From Large Industrial Ceiling Fans
Jun 06, 2023
Large industrial ceiling fans are generally installed in factories, and the working environment of factories is generally noisy, so there are no strict requirements for the noise generated by large industrial ceiling fans. However, not all factories are noisy, and the working environment of some factories is still very quiet, so the noise control of large industrial ceiling fans is particularly important. Therefore, it is very important to master the noise sources of large industrial ceiling fans and take corresponding noise reduction measures.
The noise sources of large industrial ceiling fans generally include connectors, blades and motors.
Connector: Large industrial ceiling fan operation will produce a certain force. Long-term operation, the lack of maintenance in the middle, it is easy to lead to loose connectors, due to friction will cause a large gap between the connected parts, resulting in vibration noise during operation. This noise is mostly short frequency vibration. If the user finds this problem, it should contact the manufacturer of large industrial ceiling fan in time, and be tightened by professionals to avoid gaps and effectively solve vibration and noise.
Fan blades: Due to the disturbance of the surrounding gas and parts during the rotation process, the pressure distribution on the industrial large fan blades themselves and the fan blades is uneven to form a rotating noise. In addition, when the gas flows through the blade, turbulent boundary layer, eddy current and eddy separation are generated, which causes the pressure distribution on the blade to pulsate, resulting in eddy noise. The same chord length theory of aerodynamics can be used to gradually narrow and thin the blade from root to tip, so that the blade tail becomes wider, and the width from root to tail is 29.8~19.2 cm. The air volume of the supply air is more uniform, the driving volume is larger, and there is no cavity in the middle. Reasonable blade design can effectively reduce the sound generated when the fan is running.
Motor: The motor is a very important operating part of the industrial fan, under normal circumstances, the rotation of the motor bearing will produce a natural sound, so there is almost no problem. However, the inherent vibration of the bearing motor resonates with the material of the motor components, and the axial spring constant of the bearing causes the motor to vibrate axially in the rotor, resulting in friction and noise due to poor lubrication. At this time, replacing the lubricating oil can reduce the noise caused by clicking friction and extend the service life of the motor. The use of energy-saving industrial fans is also increasing.

